+86-0632-5505899

关于我们

关于我们

Your location：

>

>

>

How to maintain the wear of the rotary joint

How to maintain the wear of the rotary joint

Categories:Industry News
Author:
Origin:
Time of issue:2021-05-13
Views:0

(Summary description)Today, I will tell you how to maintain the rotary joint after it has been used for a period of time. Let's take a look at the daily maintenance knowledge of rotary joints.

How to maintain the wear of the rotary joint

How to maintain the wear of the rotary joint





How to maintain the wear of the rotary joint

(Summary description)Today, I will tell you how to maintain the rotary joint after it has been used for a period of time. Let's take a look at the daily maintenance knowledge of rotary joints.

Categories:Industry News
Author:
Origin:
Time of issue:2021-05-13
Views:0

Information

Today, I will tell you how to maintain the rotary joint after it has been used for a period of time. Let's take a look at the daily maintenance knowledge of rotary joints.

1. Keep the rotary joint drum and the inside of the pipe clean. Special attention should be paid to new equipment, and filters should be added when necessary to avoid abnormal wear of the rotary joint caused by foreign objects.

2. As the machine is not used for a long time, it will cause scaling and rust in the rotary joint. Please be aware that it may jam or drip when it is used again.

3. If there is an oil injection device, please oil it regularly to ensure the reliability of the rotation of the rotary joint bearing.

4. The rotary joint that circulates the heating medium should gradually generate temperature to avoid sudden temperature changes.

5. Check the wear condition and thickness change of the sealing surface; observe the friction track of the sealing surface to see if there are three-point discontinuity or scratches. If there is the above condition, it should be replaced immediately.

Scan the QR code to read on your phone

Previous: What to pay attention to when installing rotary joint

Next: What are the sealing methods of rotary joints and the specifications of the seals

Previous: What to pay attention to when installing rotary joint

Next: What are the sealing methods of rotary joints and the specifications of the seals

Interactive message

Username used for comment:

客户留言

Description:

* Message contents：

Name：

Gender：

male

female

Mobile phone：

Telephone：

Fax：

E-mail：

* Verification code:

验证码

Address：

Postal code：

Recommended news

What to pay attention to when installing rotary joint 2021:05:13

Notes on installation of rotary joints. 1. Before installation, make sure that no foreign matter is mixed into the sealing surface. For connectors with inspection holes, install them with the inspection holes facing down.

How to maintain the wear of the rotary joint 2021:05:13

Today, I will tell you how to maintain the rotary joint after it has been used for a period of time. Let's take a look at the daily maintenance knowledge of rotary joints.

What are the sealing methods of rotary joints and the specifications of the seals 2021:05:13

The rotary joint is a sealed transmission device. According to the requirements of the use environment and transmission medium, different sealing rings will be selected to play a sealing role in the grease-lubricated gap to prevent debris or dust from entering the joint and reduce friction at the same time. Reduce heat and wear; but the seal ring is a vulnerable part of the rotary joint. It not only has to withstand the pressure of the internal medium, but also withstand the friction between the outside and the shell. The following is an introduction to the commonly used seal ring of the rotary joint.

Rotary joint material selection 2021:05:13

High-speed rotary joints are equipped with precision parts. In order to ensure stable operation in high-speed rotation and resist the influence of high-speed, high temperature or high pressure, different types of rotary joints have different special requirements on the materials used. In other words, stainless steel, copper, cast iron, etc. are mostly used in the production of rotary joint shells. Let's introduce them in detail below.

Participate in training on the application of magnetic liquid seals in nuclear reactors in 2021 2021:03:10

On March 10th, our company participated in the application of magnetic liquid seal in nuclear reactor organized by China Hydraulic and Pneumatic Seal Industry Association Machinery. The meeting invited members of the National Hydraulic and Pneumatic Seals Industry Association Machinery, and a total of about 150 people attended the meeting.

Foreign customers come to our company to visit and negotiate business 2020:11:06

Good quality, customers come in droves. With the rapid development of the company and the continuous innovation of research and development technology, our company is also constantly expanding the international market.

Nishan "Mountain is not high, if there are immortals, then the name is"—Shandong Xinxuan Company's 2020 Autumn Tour Activity 2020:10:08

In October, the sky was high and the clouds were light in Qufu, and the autumn scenery was pleasant. About 50 employees and their family members of Shandong Xinxuan Company participated in a one-day trip to Qufu on the 8th.

Related Products

Machinery Seal

Dd type rotary joint

Dd type rotary joint

QD rotary joint

QD rotary joint

QD-F type rotary joint

QD-F type rotary joint

QS-G type rotary joint

QS-G type rotary joint

QS-GF type rotary joint

QS-GF type rotary joint

HD type rotary joint

HD type rotary joint

Dd-F type rotary joint

Dd-F type rotary joint

QS-X type rotary joint

QS-X type rotary joint





Shandong Xinxuan Industrial Equipment Technology Co., Ltd.

搜索

Search

xinxuan

Service Hotline：

+86-0632-5505899

Company address：

567 Xingye Road, Economic Development Zone, Tengzhou City

版权所有：© 2021 Shandong Xinxuan Industrial Equipment Technology Co., Ltd. 鲁ICP备11028612号 300.CN This site supports IPV6 access